粤漫社云 基础教程19 - 使用FlashFXP软件实现批量下载 及 实现使用SFTP协议链接

粤漫社云将为了数据传输不被网络监控，将逐步转为使用SFTP和FTPS等加密协议进行数据传输
5 }; \& R; L! |# G! g鉴于我们常用的下载软件均无法实现加密码协议的使用
. V3 E4 e. A  O, J6 i经测试研究，发现主流的FTP管理软件，可以实现粤漫云盘包括FTP、SFTP和FTPS协议的下载
% X# \# f9 l6 Y( f$ |. z此文将以SFTP协议链接为使用基础，说明一下使用FlashFXP软件如何实现下载，并实现批量下载功能

今次先是设置篇，打开FLASHFXP软件的设置参数功能，按下各图说明设置好参数




9 f' q, }) x1 ?, Z7 c5 D" I设置好后则保存离开就可以

0 s, L9 s/ d# [6 G/ E! V$ |在FLASHFXP软件的菜单栏选择 工具 项
勾上 剪贴板 右侧的两个功能项，让其处于打开状态
# @  \- e/ V  j& A经测试，每次重新打开这个软件，监视 功能都会默认关闭，必须手动重新打开

0 J: K0 m& t* I7 s1 ^6 D. k但可以在 参数设置 》操作 项，启用URL剪贴板监视器功能，这样将长期开启监视
4 m0 U/ H; F& y! o! d. p, G
# \* {( H3 h' i  z4 w9 s8 e6 T6 T
在粤漫云上获得的SFTP专属下载链接如下，直接复制一个或多个
( X* j- a9 V3 t/ L% [  r4 {
7 v' {# P- K# b+ F. c2 F
之后FLASHFXP软件将会自动加载相应的链接进入软件，
并提示是否同意加密传输，这里当然要同意，否则将无法连接

* Z; H- k/ m/ T
5 _. \& \" ^. ^+ l# Z% o8 l3 k同意后，程序将会按你之前设置的文件下载位置，将文件下载回本地
通过窗口的各个功能区，可以实时查看到下载情况

9 r& v6 W5 r5 v  D$ a
/ W9 x6 e1 K6 B粤漫社将寻找到合适的使用软件对粤漫云加密传输的时候，
会对不加密的FTP链接进行放弃，所以请各会员尽快适应SFTP或FTPS的协议使用
, u+ J6 Y  m; z0 B1 ]0 [-----------------------------------------------------------------
$ m  K% `& r1 z! t  z" N( O以上教程是以粤漫社云盘 V2.0为基础蓝本编写，所以程序版本将在日后有所更新而发生变更的可能
3 V1 h# ^. R" O6 U
2 i' k' [/ v4 \: ^- u) {" }所以教程仅作参考
) T* O0 l$ v! T) o
* s6 Y7 J2 U7 _( X# _" A

艾班 发表于 2022-5-2 20:53
6 F( ?7 c! C5 s我怎么知道,点样搞啊,有点麻烦

先打开FLASHFXP 并开启 监视 剪贴板 后直接点击 分享页面的 复制链结

FLASHFXP就会马上识别并进行下载
) Y: w! C( I& a: x/ j* t; k
/ O4 R" O8 t+ \- R' W

[11:32:52] FlashFXP 5.4.0 (build 3955)
% {1 O# r& t! u/ E. @[11:32:52] Support Forums https://www.flashfxp.com/forum/
; `9 X5 X0 ], F7 m[11:32:52]  
# Z0 _' }2 s) @/ Z; W[11:32:52] Winsock 2.2 -- OpenSSL 1.1.0c  10 Nov 2016
[11:32:58] [R] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=183.27.249.166 PORT=221
$ M5 K) E& n7 J/ y. w[11:32:58] [R] 已连接到 myftp.gomicx.net
[11:32:58] [R] 主机密钥算法 ssh-dss, size 1024 bits.
[11:32:58] [R] 指纹 (SHA256): L49dLGiuJvtQs0v7CCS2gAUJpCOexDid2ac3rmbMyno=
[11:32:58] [R] 密钥交换: diffie-hellman-group1-sha1. 会话加密: aes256-ctr，MAC: hmac-sha1，压缩: none.
5 s2 W' T) L0 a% u; |7 o8 _/ \% }[11:33:00] [R] Auth Type: Password
[11:33:03] [R] 身份验证失败 [未知用户或密码无效]
% a  G1 ?. O, g0 d: |[11:33:03] [R] SSH 错误: 协商认证模式失败
[11:33:03] [R] SSH 连接已关闭
8 W- q- Z& N  ~' ~[11:33:03] [R] 连接失败
, u& i) W) I7 |7 ]6 A" g# r

终于用楼主方法 成功左了  

点解我无弹呢个同意出黎既?
我复制完得感样系咩意思?

方便快捷，精神

我直接系连远程浏览器都链接唔成功，点算？
# D  I+ g4 y' u) ?0 D( W[16:47:23] [R] 正在连接到 wcloud.gomicx.net -> DNS=wcloud.gomicx.net IP=103.56.55.23 PORT=22
[16:47:23] [R] 已连接到 wcloud.gomicx.net
' N- Q6 K! b( P! l[16:47:23] [R] 主机密钥算法 ecdsa-sha2-nistp256, size 192 bits.
0 ]; C, \) s& O, X) r  L[16:47:23] [R] 指纹 (SHA256): i8Nef+9mVwRCrGpITxCi7QqiWNUIr3jdTzCJmTWMbAw=
- \$ i" Q6 N: H6 p[16:47:23] [R] 密钥交换: curve25519-sha256@libssh.org. 会话加密: aes256-gcm@openssh.com，MAC: <implicit>，压缩: none.
[16:47:36] [R] Auth Type: Password
[16:47:38] [R] 身份验证失败 [未知用户或密码无效]
; [  o; ]: {. G9 q[16:47:38] [R] SSH 错误: 协商认证模式失败
[16:47:38] [R] SSH 连接已关闭
[16:47:38] [R] 连接失败

設定默認下載文件夾好似同冇設冇乜分別，佢自動下載的時候都係下落去界面左邊的文件夾位置

入黎学下野先

我终于可以学识下载啦

[22:34:42] [R] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=221
[22:34:42] [R] 已连接到 myftp.gomicx.net
! G) K( }6 s- h! n[22:34:43] [R] 主机密钥算法 ssh-dss, size 1024 bits.
: q- C5 Q- t) A( m6 k[22:34:43] [R] 指纹 (SHA256): L49dLGiuJvtQs0v7CCS2gAUJpCOexDid2ac3rmbMyno=
! I6 q4 m* A; ~- k; L& O; ?[22:34:43] [R] 密钥交换: diffie-hellman-group1-sha1. 会话加密: aes256-ctr，MAC: hmac-sha1，压缩: none.
4 I2 u$ a5 g7 m7 I! Y: f[22:34:45] [R] Auth Type: Password
- Z' b2 w4 V: K3 t/ h2 m[22:34:58] [R] 身份验证失败 [未知用户或密码无效]
/ i4 ]/ @; ?  i! E' Z5 @" O9 e' }[22:34:58] [R] SSH 错误: 协商认证模式失败
+ |) `: S/ a, [, G3 I+ K# f, D" s+ E[22:34:58] [R] SSH 连接已关闭
[22:34:58] [R] 连接失败
/ ^2 |) s. Y0 J  a[22:35:01] [R] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=221
[22:35:01] [R] 已连接到 myftp.gomicx.net
[22:35:01] [R] 主机密钥算法 ssh-dss, size 1024 bits.
[22:35:01] [R] 指纹 (SHA256): L49dLGiuJvtQs0v7CCS2gAUJpCOexDid2ac3rmbMyno=
[22:35:01] [R] 密钥交换: diffie-hellman-group1-sha1. 会话加密: aes256-ctr，MAC: hmac-sha1，压缩: none.
[22:35:04] [R] Auth Type: Password
/ T* e8 ], F6 r. G6 L" E[22:35:16] [R] 身份验证失败 [未知用户或密码无效]
) @! U* B; }) d' P2 }[22:35:16] [R] SSH 错误: 协商认证模式失败
' X6 T4 n& `% h0 _7 Z9 u" D[22:35:16] [R] SSH 连接已关闭
[22:35:16] [R] 连接失败

一直下载不到，试了2个链接都是这样：
FlashFXP 5.4.0 (build 3970)
: N+ _# Q! t2 _  F! ASupport Forums https://www.flashfxp.com/forum/
9 b, ?0 e) \2 h0 k! z5 N* C
/ m/ ^% e  O+ @% B' Y[21:43:56] Winsock 2.2 -- OpenSSL 1.1.0e  16 Feb 2017
! l. C  a( f) ?7 Y1 H; T/ e. R7 K[21:45:26] [L] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=990
- w* K  F6 V# t3 F1 a[21:45:26] [L] 已连接到 myftp.gomicx.net
[21:45:26] [L] TLSv1.2 协商成功...
[21:45:26] [L] TLSv1.2 已加密会话正在使用密码 ECDHE-RSA-AES256-GCM-SHA384 (256 位)
[21:45:29] [L] 220 Serv-U FTP Server v15.1 ready...
% H, p& j; |- `3 l: F0 t5 c8 E[21:45:29] [L] PBSZ 0
' q6 M) H' I4 Q# {[21:45:29] [L] 200 PBSZ command OK. Protection buffer size set to 0.
[21:45:29] [L] USER Gd_28VJS1
+ L  @% U: O* c[21:45:31] [L] 331 User name okay, need password.
* z2 ^6 B* i' M* }: T" C[21:45:31] [L] PASS (hidden)
[21:45:47] [L] 530 FTP is not allowed for this user account.  Please contact your system administrator for information about how to use this server.
[21:45:47] [L] 连接失败 (Connection closed by server)
9 u2 o  q6 S5 A  {$ O0 I[21:45:47] [L] 尝试重新连接 #10 次后延迟 1 秒
[21:45:57] [L] 正在尝试重新连接.
% j% j2 C1 W" y, K6 p[21:45:57] [L] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=990 (次尝试 # 1)
8 n; L$ G. X5 D2 Q[21:45:57] [L] 已连接到 myftp.gomicx.net
[21:45:57] [L] TLSv1.2 协商成功...
[21:45:57] [L] TLSv1.2 已加密会话正在使用密码 ECDHE-RSA-AES256-GCM-SHA384 (256 位)
[21:45:57] [L] 220 Serv-U FTP Server v15.1 ready...
, b% s  V8 i  s5 R[21:45:57] [L] PBSZ 0
[21:45:57] [L] 200 PBSZ command OK. Protection buffer size set to 0.
[21:45:57] [L] USER Gd_28VJS1
' _  m0 I  [6 \$ j[21:45:59] [L] 331 User name okay, need password.
[21:45:59] [L] PASS (hidden)
[21:46:20] [L] 530 FTP is not allowed for this user account.  Please contact your system administrator for information about how to use this server.
7 Y4 m) c7 Z7 ]! Y$ D[21:46:20] [L] 连接失败 (Connection closed by server)
4 A" |# I( {) q4 u[21:46:20] [L] 尝试重新连接 #120 次后延迟 2 秒
/ W! b9 ~8 R8 E$ v" O3 Z% T[21:48:20] [L] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=990 (次尝试 # 2)
  _" c' s0 G, M) l; ^[21:48:20] [L] 已连接到 myftp.gomicx.net
, G/ p9 P  B) i" f  y! J: U4 p[21:48:20] [L] TLSv1.2 协商成功...
5 \3 s" R7 g3 }  w& [0 s[21:48:20] [L] TLSv1.2 已加密会话正在使用密码 ECDHE-RSA-AES256-GCM-SHA384 (256 位)
/ e+ Z% O6 E% e[21:48:20] [L] 220 Serv-U FTP Server v15.1 ready...
[21:48:20] [L] PBSZ 0
- `$ f0 q8 i1 p: C7 E: n* \( q# C4 J[21:48:20] [L] 200 PBSZ command OK. Protection buffer size set to 0.
[21:48:20] [L] USER Gd_28VJS1
[21:48:23] [L] 331 User name okay, need password.
[21:48:23] [L] PASS (hidden)
[21:48:42] [L] 530 FTP is not allowed for this user account.  Please contact your system administrator for information about how to use this server.
[21:48:42] [L] 连接失败 (Connection closed by server)
[21:48:42] [L] 尝试重新连接 #120 次后延迟 3 秒
9 c9 L- D) K( i9 q" d- h[21:50:43] [L] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=990 (次尝试 # 3)
[21:50:43] [L] 已连接到 myftp.gomicx.net
) G% d$ ?$ s* u) p[21:50:43] [L] TLSv1.2 协商成功...
( P- @; O" h7 k: Q: M8 ^[21:50:43] [L] TLSv1.2 已加密会话正在使用密码 ECDHE-RSA-AES256-GCM-SHA384 (256 位)
. o4 g7 C& h8 l: A9 O; P[21:50:43] [L] 220 Serv-U FTP Server v15.1 ready...
0 m) k# C: O# Z" p4 r[21:50:43] [L] PBSZ 0
1 q$ d. w/ I! N* S[21:50:43] [L] 200 PBSZ command OK. Protection buffer size set to 0.
# G. ~' g  e3 E2 J, I9 B[21:50:43] [L] USER Gd_28VJS1
/ C+ h" }9 i: A6 \4 [* n[21:50:46] [L] 331 User name okay, need password.
: U; S6 j1 D- q0 y[21:50:46] [L] PASS (hidden)
[21:51:03] [L] 530 FTP is not allowed for this user account.  Please contact your system administrator for information about how to use this server.
9 E+ Y- Y  e& |& G[21:51:03] [L] 连接失败 (Connection closed by server)
& V5 Y7 Z' F0 r2 Q) q& l6 E/ B[21:51:03] [L] 尝试重新连接 #120 次后延迟 4 秒
[21:53:04] [L] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=990 (次尝试 # 4)
+ u! j0 i) k; |& r[21:53:04] [L] 已连接到 myftp.gomicx.net
[21:53:04] [L] TLSv1.2 协商成功...
[21:53:04] [L] TLSv1.2 已加密会话正在使用密码 ECDHE-RSA-AES256-GCM-SHA384 (256 位)
  P3 g4 k( ?. E2 L$ V8 ~[21:53:04] [L] 220 Serv-U FTP Server v15.1 ready...
+ ]  A, v, F7 ~6 ~1 p8 y6 e[21:53:04] [L] PBSZ 0
. I+ S$ ?: J" A' f2 g. @8 z[21:53:04] [L] 200 PBSZ command OK. Protection buffer size set to 0.
* d* d7 Y( g. N4 b" L; K. Z[21:53:04] [L] USER Gd_28VJS1
[21:53:07] [L] 331 User name okay, need password.
[21:53:07] [L] PASS (hidden)
, T+ M( W" X0 p5 Q9 u[21:53:26] [L] 530 FTP is not allowed for this user account.  Please contact your system administrator for information about how to use this server.
[21:53:26] [L] 连接失败 (Connection closed by server)
3 e& u2 x/ |* [( C7 e/ t5 |; T[21:53:26] [L] 尝试重新连接 #120 次后延迟 5 秒
[21:55:26] [L] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=990 (次尝试 # 5)
[21:55:26] [L] 已连接到 myftp.gomicx.net
9 E& T4 M& V3 S[21:55:27] [L] TLSv1.2 协商成功...
[21:55:27] [L] TLSv1.2 已加密会话正在使用密码 ECDHE-RSA-AES256-GCM-SHA384 (256 位)
[21:55:27] [L] 220 Serv-U FTP Server v15.1 ready...
[21:55:27] [L] PBSZ 0
+ z' \. a7 q) I, Z1 ][21:55:27] [L] 200 PBSZ command OK. Protection buffer size set to 0.
[21:55:27] [L] USER Gd_28VJS1
[21:55:29] [L] 331 User name okay, need password.
: a* y7 U( o7 h[21:55:29] [L] PASS (hidden)
[21:55:49] [L] 530 FTP is not allowed for this user account.  Please contact your system administrator for information about how to use this server.
# E" P' {$ F# R& z4 p7 f' H[21:55:49] [L] 连接失败 (Connection closed by server)
! _  k2 \+ A0 \9 n. E3 ?5 @[21:55:49] [L] 尝试重新连接 #120 次后延迟 6 秒
  X' e/ G$ D. G9 E[21:57:41] [L] 重试尝试已中止
+ v/ A* K# i' W[21:57:49] [L] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=990
* J6 B3 W$ P5 |8 w# D. @' ~[21:57:49] [L] 已连接到 myftp.gomicx.net
[21:57:49] [L] TLSv1.2 协商成功...
! }! T2 f2 e. t[21:57:49] [L] TLSv1.2 已加密会话正在使用密码 ECDHE-RSA-AES256-GCM-SHA384 (256 位)
[21:57:49] [L] 220 Serv-U FTP Server v15.1 ready...
[21:57:49] [L] PBSZ 0
8 u% e( a" o% s- y) n% v[21:57:49] [L] 200 PBSZ command OK. Protection buffer size set to 0.
[21:57:49] [L] USER Gd_4612RY
[21:57:52] [L] 331 User name okay, need password.
[21:57:52] [L] PASS (hidden)
[21:58:10] [L] 530 FTP is not allowed for this user account.  Please contact your system administrator for information about how to use this server.
[21:58:10] [L] 连接失败 (Connection closed by server)
[21:58:10] [L] 尝试重新连接 #10 次后延迟 1 秒
[21:58:20] [L] 正在尝试重新连接.
[21:58:20] [L] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=990 (次尝试 # 1)
$ N$ o. c3 q& F0 X. ~, Z[21:58:20] [L] 已连接到 myftp.gomicx.net
; U- i; `/ Y2 [7 F' a  Y[21:58:21] [L] TLSv1.2 协商成功...
6 f" V4 q0 P" r: U4 a' s[21:58:21] [L] TLSv1.2 已加密会话正在使用密码 ECDHE-RSA-AES256-GCM-SHA384 (256 位)
[21:58:21] [L] 220 Serv-U FTP Server v15.1 ready...
[21:58:21] [L] PBSZ 0
[21:58:21] [L] 200 PBSZ command OK. Protection buffer size set to 0.
; g) V0 I( f$ s9 B+ x- |' y; t4 s2 E[21:58:21] [L] USER Gd_4612RY
0 ?5 {( t3 k- D9 A/ W+ X[21:58:23] [L] 331 User name okay, need password.
[21:58:23] [L] PASS (hidden)
* E) V* G7 e+ x1 Z% N3 b$ m[21:58:42] [L] 530 FTP is not allowed for this user account.  Please contact your system administrator for information about how to use this server.
" p6 d0 L% `: v$ z* e+ z7 y* W0 q[21:58:42] [L] 连接失败 (Connection closed by server)
2 c( a) C/ d7 c* S[21:58:42] [L] 尝试重新连接 #120 次后延迟 2 秒
( T4 g1 W9 q* e9 b7 j8 v[22:00:42] [L] 正在连接到 myftp.gomicx.net -> DNS=myftp.gomicx.net IP=198.18.13.203 PORT=990 (次尝试 # 2)
[22:00:42] [L] 已连接到 myftp.gomicx.net
" z. M3 p$ y/ H0 I) [! F3 u[22:00:43] [L] TLSv1.2 协商成功...
[22:00:43] [L] TLSv1.2 已加密会话正在使用密码 ECDHE-RSA-AES256-GCM-SHA384 (256 位)
& O5 x. R% l1 \7 I3 c- t[22:00:43] [L] 220 Serv-U FTP Server v15.1 ready...
[22:00:43] [L] PBSZ 0
[22:00:43] [L] 200 PBSZ command OK. Protection buffer size set to 0.
[22:00:43] [L] USER Gd_4612RY
[22:00:45] [L] 331 User name okay, need password.
: _2 r6 t* M9 J[22:00:45] [L] PASS (hidden)
[22:01:04] [L] 530 FTP is not allowed for this user account.  Please contact your system administrator for information about how to use this server.
/ V+ R/ F6 v9 r[22:01:04] [L] 连接失败 (Connection closed by server)
[22:01:04] [L] 尝试重新连接 #120 次后延迟 3 秒

基本弄明白了，多谢楼主

新手教学，好嘢。